How To Measure Bangle Size

How To Measure Bangle Size – Complete Bangle Size Guide

How To Measure Bangle Size? Find out in our Bangle Size Guide

Are you shopping for trendy bangles?

In this guide, we cover all the information you require to know how to measure bangle size. Choose the correct bangle size, including size charts, measurements, and how to measure your wrist and hand.

Choosing the right bangle size is crucial.

A bangle, is often also called a bangle bracelet. Modern bracelet designs come in a variety of shapes, some of which defy conventional perfect circle patterns and others that are more organic in nature. In the forearm, between the wrist bone and the largest portion of the arm, is where bracelets and bangles are typically worn. To wear a closed bangle, slide it over your hand’s knuckles and so it is very important to know How To Measure Bangle Size.

An incorrectly sized closed bangle will not slide over your hand smoothly when you put it on or take it off, thus it’s crucial to choose the correct size when purchasing a bangle.

  • It will be difficult to put on a bangle if it is too small.
  • Bangles that are overly big can slip off your hand with ease.
  • To get the desired effect, the appropriate-sized bangle is also essential.

How to measure for the right-sized bangle

There are 3 ways to measure bangle size:

  1. To find the appropriate closed bangle size, measure the circumference of your hand.
  2. To choose cuff types, hinged bangles, or open bangles that should fit comfortably around or slightly above your wrist, measure the circumference of your wrist.
  3. Measure a Bangle that fits you well to find its diameter.

You will need…

  • A straight ruler and a flexible measuring tape or piece of ribbon or string.

OR

  • An appropriately sized bracelet.

 

1. Measuring the width of your hand

 

Step 1: Tuck your thumb into your hand’s palm to position the hand as though you were putting on a bracelet.

Step 2: Encircle each knuckle, including the thumb knuckle, using the measuring tape. Take note of the measurement at the intersection. This is the precise size/circumference of your hand.

 

2. Measure the size of your wrist

Step 1: Encircle the wrist bone with the tape measure so that it fits securely without being too tight or too loose.

Step 2:Mark the areas where the tape measure overlaps in step two. This is the precise measurement of your wrist.

Note: To measure the length from the point of overlap to the end, use a straight ruler in place of the measuring tape. You can also use a thread or ribbon.

 

3. Measuring an existing, well-fitting bracelet’s diameter

Place a straight ruler over the bangle and measure across its middle from one inner edge to the other. The inside diameter measurement in mm, centimeters, or inches will provide you with the accurate size.

If you have a well-fitting bracelet, we advise you to measure its interior diameter. This measurement will help you determine the appropriate bangle size.

You can use an online converter or multiply the diameter by 3.14 (C = 3.14 x D) to convert the diameter to circumference.

How to read bangle size charts

It’s possible that you’ve observed differences across brands’ definitions of measures and sizing; some use diameters, while others use circumferences.

Our exquisite collections of bracelets are available in a variety of sizes, from extra-small to extra-large. To assist you in determining which size best suits you, the following crucial dimensions and sizing guidelines are provided.

Charts for bangle sizes display a bangle’s inner diameter (Ø) or inside circumference.

The measurement of the entire circumference of your hand divided by 3.14 yields the internal diameter of a bangle (internal diameter Ø = circumference/3.14).

Internal diameter is often measured in millimeters (mm) while the circumference is measured in inches or centimeters (cm) on size charts (1″ = 2.5 cm).

Tips to keep in mind before buying bangles/bracelet

  1. Purchasing bangles that are slightly bigger (between 1/2 and 3/4 inches) than your wrist circumference is always advised. In this manner, wearing them won’t be tough for you.
  2. To make it easier to slide down the bangles, wrap your hand with a silk or crepe material.
  3. Choose the openable bangles if you are unsure of your size while purchasing them online. They are simple to wear and adaptable.
  4. Make sure the diamonds in the diamond bangle are of a higher grade and quality if you plan to purchase it for everyday wear. Select a setting that is both simple and long-lasting.
  5. While purchasing gold bangles, make sure to get an appropriate storage box for the same to maintain the bangle shape. A sturdy, well-made box would protect the bracelets from harm.
Bangle Size Diameter Diameter Circumference
Inches Centimeters Inches
2-2 2.125 5.4 6.67
2-4 2.25 5.7 7.06
2-6 2.375 6 7.46
2-8 2.5 6.5 7.85
2-10 2.625 6.7 8.24
2-12 2.75 7 8.64

 

If you have any questions on “How To Measure Bangle Size”, feel free to comment below.

 

 

Also Read: Shares Pledging: Meaning, Advantages, and Stock Margin Effects?

Shares Pledging: Meaning, Advantages, and Stock Margin Effects?

Also Read: How To Write Application In Sanskrit – संस्कृत में आवेदन पत्र लेखन

संस्कृत में आवेदन पत्र लेखन सीखे – Learn How To Write Application In Sanskrit

 

Also Read: How To Identify Bhringraj Plant? Know All It’s Benefits and Uses

Know How To Identify Bhringraj Plant? Know All It’s Benefits and Uses

Leave a Reply

Your email address will not be published. Required fields are marked *